fbpx

5 Ways To Find Water Leaks In Your Home

Early detection of a water leak can save you money and avert potential disaster. Here are some signs that you may have a leak and should consider contacting a plumber for water leak repair services.

  1. Check your water meter
    One of the best ways to tell if you have a leak in some part of your plumbing is to check the water meter. To do this, you’ll first have to turn off all the water in your home. Shut off all faucets, and make sure the dishwasher and washing machine are not running. Next, watch the meter and see if it begins to change. If it does, you likely have a fast-moving leak. If the meter doesn’t change immediately, wait two hours and check it again. If it has changed despite all the water being off, you may be dealing with a slower leak. The leak could be anywhere after the meter, or even underground. Remember that all piping after the meter is a homeowner’s responsibility.
  2. Look at your usage
    The U.S. Environmental Protection Agency recommends checking your winter water usage to find out if a leak is occurring somewhere in your home. If a family of four is using more than 12,000 gallons of water per month, there’s probably have a serious leak problem somewhere in your plumbing system.
  3. Monitor your bill
    If your bill is rising consistently but your water use habits haven’t changed, a leak may be to blame. Gather some bills from the past few months and compare them to see if there’s a steady increase. Your water bill should remain within the same range month to month. Remember that some of your pipes may be underground. You may never detect leaks in this part of your system, but you will always pay for them.
  4. Grab some food coloring
    Toilets can account for up to 30 percent of your water use, so you should check to ensure they’re running properly. To test for leaks, add a few drops of food coloring to your toilet tank and wait 10 minutes. If the color shows up in your bowl, then you have a leak allowing water to flow from the tank to your drain without ever flushing the bowl.
  5. Check home exterior usage
    Leaks don’t just happen inside the home — they occur outside as well. Check your outside spigots by attaching a garden hose; if water seeps through the connection while the hose is running, replace the rubber hose gasket and check to see all connections are tight. A system with even a small leak could be wasting 6,300 gallons of water per month.If you suspect a leak anywhere in your plumbing system, call in a professional to make a repair as soon as possible. Don’t wait until it gets worse and you end up with a real mess on your hands!